Do I have to grease any bearings on the fixed bowl “moveable” Spiral Mixer?

You are here:
  • KB Home
  • WP Kemper
  • Do I have to grease any bearings on the fixed bowl “moveable” Spiral Mixer?
< Back

Yes, every 50 operating hours. Use a grease gun on the fitting found under the bottom of the bowl. Align the recess to the grease fitting by briefly pressing the START/LOW SPEED button until the recess is above the fitting providing access for the grease gun

Previous What kind of grease do you recommend for the bearings on the fixed-bowl “moveable” Spiral Mixer?
Next My spiral mixer will not go over to second speed after the first speed timer counts down.